Product Overview
A clear liquid chemical cleaning product for scale and mineral deposits on aluminium and aluminium alloy surfaces. Its organic acids, wetting agents and inhibitors are assessed for material-specific cleaning requirements.
Where Is Kelvenoks Ferlin 130 Used?
- Aluminium heat transfer surfaces
- Equipment containing aluminium alloy components
Technical Features
- Designed for aluminium and aluminium alloys.
- Clear liquid containing organic acids, wetting agents and inhibitors.
- Conditions depend on alloy composition and deposits.
Chemical Cleaning Application
1. Mixture preparation
The technical bulletin specifies 1 part Kelvenoks Ferlin 130 and 2 parts water. Measurement basis and preparation method are clarified in the technical procedure before application.
2. Cleaning monitoring
Chemical cleaning is monitored through pH measurements and technical checks. Heated application may be assessed according to system characteristics; temperature and duration depend on equipment materials and deposits.
3. Rinsing
After cleaning, the system is rinsed until blowdown water reaches pH 7–7.5.
4. Neutralisation and passivation
After rinsing, ALKALEN NP-100 is used for neutralisation and surface passivation.
- Material Focus
- Aluminium and aluminium alloys
- Packaging Options
- 35, 70 and 250 kg HDPE containers
Product selection and use conditions depend on system requirements. Contact us for the current technical bulletin, safety data sheet and supply information.