Product Overview
A chemical cleaning product for scale and mineral deposits on stainless steel and stainless alloy surfaces. Its organic acids, wetting agents and inhibitors are assessed for material-compatible cleaning of tanks, pipelines and heat transfer equipment.
Where Is Kelvenoks Ferlin 128 Used?
- Stainless steel heat transfer surfaces
- Stainless steel tanks and process pipelines
- Stainless heat exchangers subject to material review
Technical Features
- Contains organic acids, wetting agents and inhibitors.
- Intended for scale and mineral deposits on stainless surfaces.
- Selection considers alloy grade and all other circuit materials.
Chemical Cleaning Application
1. Mixture preparation
The technical bulletin specifies 1 part Kelvenoks Ferlin 128 and 2 parts water. Measurement basis and preparation method are clarified in the technical procedure before application.
2. Cleaning monitoring
Chemical cleaning is monitored through pH measurements and technical checks. Heated application may be assessed according to system characteristics; temperature and duration depend on equipment materials and deposits.
3. Rinsing
After cleaning, the system is rinsed until blowdown water reaches pH 7–7.5.
4. Neutralisation and passivation
After rinsing, ALKALEN NP-100 is used for neutralisation and surface passivation.
- Material Focus
- Stainless steel and stainless alloys
- Packaging Options
- 35, 70 and 250 kg HDPE containers
Product selection and use conditions depend on system requirements. Contact us for the current technical bulletin, safety data sheet and supply information.